How to Fit Wired Earbuds and Check Your Call Setup
A step-by-step routine for fitting silicone earbuds, checking listening and call performance, and managing a wired cord for daily use.
Explore the picks
When wired earbuds sound off or calls are hard to follow, the fit is a useful first thing to check. A tip that does not suit your ear canal, or an earbud that is not seated properly, may affect sound qualities and call performance. Use this simple setup sequence to adjust the fit, check how it works for your usual tasks, and leave the cord ready for next time.
Ad · We may earn a commission. As an Amazon Associate I earn from qualifying purchases.
1. Choose a starting tip size
Begin with the silicone tip already fitted, then compare it with the included small, medium, and large options. Change one side at a time so you can notice whether a different size feels more suitable in that ear. Do not assume both ears need the same size: judge each side by how securely and comfortably the earbud sits. The product note specifically advises changing tips if their size does not match your ear canals or the headset is not worn properly.
2. Seat each earbud before judging sound
Insert the earbuds as you normally would, then make a small adjustment so each tip sits snugly rather than loosely at the entrance of the ear. If one side feels unstable or the sound seems different from what you expect, reseat it before changing anything else. A poor match or improper wear may affect both sound qualities and call performance, so fit is part of the setup—not merely a comfort preference.
3. Check your usual listening
Play a familiar music track at a comfortable level and listen for whether vocals and other details are clear to you. Then compare the left and right sides for an obvious difference. If one side seems less settled, try another tip size on that side and repeat the check. The listing describes 9 mm dome-type driver units and neodymium magnets, but those specifications do not replace checking how the fit works for your ears and listening habits.
4. Make a short call check
Before relying on the earbuds for a conversation, make a brief call in a setting where you can hear the other person clearly. Pay attention to whether the sound stays consistent as you move normally, and ask whether your voice is coming through clearly. If performance is disappointing, first reseat the earbuds and revisit the tip size; the product note identifies fit and proper wear as possible factors. The product title identifies a mic, but the supplied information does not specify its placement or call-control functions.
5. Settle the cord for the next use
These are wired earbuds with a Y-type cord. After listening, bring the two sides together without pulling tightly on them, then slide the included cord-slider to help keep the cord from tangling on the go. For storage, avoid winding the cable tightly around the earbuds. Keeping the cord arranged loosely makes it easier to start the same fit-and-check routine next time.
Before you decide
- Try the included small, medium, and large tips as needed.
- Check that each earbud is seated snugly; assess each ear separately.
- Test familiar music and a brief call after adjusting fit.
- Use the Y-cord slider to help manage the cable between uses.
A relevant item to explore

Sony MDREX15AP In-Ear Earbud Headphones with Mic, Black (MDREX15AP/B)
The Sony MDREX15AP/B is a wired in-ear headphone listing that identifies a mic and includes small, medium, and large silicone earbuds. Its Y-type cord has a slider described as helping prevent tangles. These details make it relevant to a fit-and-call setup routine; they do not establish how it will fit or perform for any particular listener.
View the exact item and current retailer offer →
Check the exact variant, seller, included pieces, care instructions and current terms. Purchases and checkout take place with the retailer.
Common questions
Do both earbuds need the same tip size?
Not necessarily. Compare the included sizes on each side and choose based on how each earbud sits and performs. The supplied product information does not require matching sizes.
What should I check if calls or sound seem off?
First reseat the earbuds and try a tip size that fits more snugly. The product note says tip mismatch or improper wear may affect sound qualities or call performance.
Explore this subject
Prepared by Biz E-Deals using product listing information and general shopping considerations. We have not personally tested the item. Listing information can change; confirm details with the retailer.
Lifestyle context photo: Photo by Khanh Do on Unsplash. The pictured setting and items illustrate the topic; exact featured products are shown separately in this guide.
Your next useful read
Explore shopping guides →
Earbud Touch Controls: Map Calls, Music and Voice Commands
A practical guide to deciding whether an earbud’s touch controls suit the way you handle calls, music and voice commands across devices.
Read the guide
A Small Charging-Station Upgrade: Give Each Cable a Job
A simple way to make a shared charging setup easier to use: assign cables to specific spots, then check length, compatibility and connection needs ...
Read the guide
Give Your Phone a Place Beside Your Laptop
A practical desk setup for keeping a phone reference visible while you work, with angle, case-clearance and pack-away checks for a folding stand.
Read the guideGood finds. A little less searching.
Choose your email topics, start with our welcome guide, and join the list for upcoming curated editions.
Choose your email topics on the next page, then confirm in your inbox. Free and optional. No account needed. Privacy policy